Home | AR PARTS | UPPER PARTS |
0.936 Adjustable Gas Block - Low Profile - Nitride - ODIN WORKS 0.936 Adjustable Gas Block - Low Profile - Nitride - ODIN WORKS
SKU: GA935NIAD_OW

0.936 Adjustable Gas Block - Low Profile - Nitride - ODIN WORKS

AR15Parts.com
$110.00

ODIN Works .936 Adjustable Low Profile Gas Block Carbon Steel Nitride Treated

Other gas blocks are tunable, but the Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability. Front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you are done. Will fit any barrel with .936 diameter and works with any caliber.

 

Technical Specs
  • Not for use with pistol length gas systems and high pressure rounds
  • Fits inside all ODIN Works Forends
  • Fits .936" diameter barrels
  • Weight: 2.45 oz (includes detent ball, screws and pin)
  • Made from Carbon Steel
  • Nitride finish
  • Stainless steel adjustment screw and spring
  • 20 adjustments
  • Includes detent ball, cross pin, set screws, and hex wrenches
  • MADE IN USA

    To Disassemble for Periodic Cleaning:

    1. Loosen set screw #1
    2. Loosen and remove screw #2.
    3.Carefully remove spring and detent ball.
    4. Remove gas adjustment screw #3.
    5. Soak in cleaning solvent.


Full Description
Current Stock: 5
  • Description

    ODIN Works .936 Adjustable Low Profile Gas Block Carbon Steel Nitride Treated

    Other gas blocks are tunable, but the Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability. Front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you are done. Will fit any barrel with .936 diameter and works with any caliber.

     

    Technical Specs
    • Not for use with pistol length gas systems and high pressure rounds
    • Fits inside all ODIN Works Forends
    • Fits .936" diameter barrels
    • Weight: 2.45 oz (includes detent ball, screws and pin)
    • Made from Carbon Steel
    • Nitride finish
    • Stainless steel adjustment screw and spring
    • 20 adjustments
    • Includes detent ball, cross pin, set screws, and hex wrenches
    • MADE IN USA

      To Disassemble for Periodic Cleaning:

      1. Loosen set screw #1
      2. Loosen and remove screw #2.
      3.Carefully remove spring and detent ball.
      4. Remove gas adjustment screw #3.
      5. Soak in cleaning solvent.


  • Details

    Details

    Current Stock: 5
    SKU: GA935NIAD_OW
    Availability: Usually Ships in 24 Hours

Related Products