Anti-Walk Pin Set for AR15 or AR10/308 Lower Receiver Stainless Steel
Use our AR15Part.com Anti-Walk Pins for a refined
fire control system. Removing all the
slop between the trigger, hammer, pins and the receiver results in
that extra bit of enhancement to get the maximum performance potential
out of high-grade trigger parts.
Pis diameter is .156" for standard small pin receivers,
these tool steel trigger/hammer pins are stainless steel for corrosion
resistance and retained by buttonhead retainer screws
with thread locker on both ends.
No modification to the lower receiver is needed, but be
aware that the trigger and hammer may have to be reamed for a perfect
fit with these parts, and a detail stripping of the lower receiver will be required in most cases
Comes with 4 screws, 2 pins, 2 allen wrenches and pin guide tip for easy installation.