Home > AR 15 Handguards and Free Float Rails >

AR15Part.com 15" KEYMOD Free Float Rail Slim Profile - EXTENDED RIFLE LENGTH OD Green
AR15Part.com 15" KEYMOD Free Float Rail Slim Profile - EXTENDED RIFLE LENGTH OD Green


 
Alternative Views:
List Price: $249.99
Our Price: $99.99
Savings: $150.00

Availability:: Usually Ships in 24 to 72 Hours
Product Code: KMEXRL15ODG
Qty:

Description Additional Info
 

15" KEYMOD Free Float Rail Slim Profile - EXTENDED RIFLE LENGTH OD Green 100% US MADE

  • Profile - Narrow as pictured with thumb slots on top for common 3 gun shooting grip. Ergonomic dimples throughout the length of the hand guard for smooth, non-marring, comfortable grip.
  • Inside I.D. - 1.350"
  • Platform – AR15 (This will fit any standard MILSPEC AR15 upper receiver).
  • Hand Guard Length - Extended Rifle Length, 15" overall
  • Hand Guard Composition – 6061 T6 Aluminum
  • Hand Guard Finish – OD Green
  • Total Weight w/o Barrel Nut - ONLY 8.8 OZ!!!!!!
  • THIS HAND GUARD WILL FIT OVER A STANDARD BULL BARREL WITH LOW PROFILE GAS BLOCK
  • THIS UNIT WILL NOT WORK WITH A GAS PISTON SYSTEM
  • Items Included - Hand Guard, Barrel Nut, 2 tension bolts. Keymod rail sections NOT included but are available for purchase on our website.
  • ZERO rail allignment issues. ZERO timing issues with barrel nut. Barrel nut installs easily with a simple crescent wrench.
  • 100% US MADE exclusively for AR15Part.com

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Better than expected April 6, 2020
Reviewer: Anonymous Person from Minnesota  
A simple, well made handguard that’s lightweight. The color matches the ceracoated upper I have perfectly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 April 15, 2018
Reviewer: Jim McKean from Evansville, IN United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 More than expected January 19, 2018
Reviewer: Anonymous Person from Vallonia, IN United States  
I was looking for a rail with this profIle to allow for a 44mm objective optic with medium height bases.  Having the top section of rail with the lower profile was the selling point for me however this rail has a fit and finish that is every bit as good as some of the 200$ and up rails I have purchased. The biggest down side to me from a looks standpoint wad the description stated that the rail would have the company logo.  I was not thrilled with having a .com anywhere on my riffle however the only engraving is a Made in the USA.   I would and will be using this rail in future builds.

Was this review helpful to you?